Use the following procedure to audition an effect patch using the Guitar Amp Simulation:
1. Connect a guitar to the GUITAR Hi-Z input.
2. Press CATEGORY
3. Use the NUMBER/VALUE dial to select the "E.GUITAR" category, then press the NUMBER/VALUE dial.
4. Use the NUMBER/VALUE dial to select "PA 13 VINTAGE TWIN," then press the NUMBER/VALUE dial to load the effect.
5. Play the guitar to hear the effected signal.
1. Connect a guitar to the GUITAR Hi-Z input.
2. Press CATEGORY
3. Use the NUMBER/VALUE dial to select the "E.GUITAR" category, then press the NUMBER/VALUE dial.
4. Use the NUMBER/VALUE dial to select "PA 13 VINTAGE TWIN," then press the NUMBER/VALUE dial to load the effect.
5. Play the guitar to hear the effected signal.