The RS-70 can have multiple rhythm sets active at the same time. Any (or all) parts can be a rhythm part. Use the following procedure to assign a rhythm set to a part:
1. Press PATTERN, under PERFORM, so it is lit.
2. Press PART SELECT so it is lit.
3. Press one of the numbered buttons (0 9) to select a part.
4. While holding SHIFT, press the left PAGE/CURSOR button several times to display the Rh rhythm set menu.
5. Press the VALUE buttons to choose a rhythm set for the selected part.
6. Repeat steps 3 through 5 for additional parts if desired.
NOTE: Be sure to "write" your edited performance to save your settings.
1. Press PATTERN, under PERFORM, so it is lit.
2. Press PART SELECT so it is lit.
3. Press one of the numbered buttons (0 9) to select a part.
4. While holding SHIFT, press the left PAGE/CURSOR button several times to display the Rh rhythm set menu.
5. Press the VALUE buttons to choose a rhythm set for the selected part.
6. Repeat steps 3 through 5 for additional parts if desired.
NOTE: Be sure to "write" your edited performance to save your settings.