You can set the VS-2000 so that it remains in Locator mode, or returns back to the Tracks Status mode immediately after pressing a locator.
1. Hold down SHIFT and press F4.
2. If you don't see "System" above F1, press PAGE until you do.
3. Press F1[System].
4. If F1"Param1" isn't highlighted, press F1.
5. You can set the RTN TO TR STATUS SW box to:
"on"- to automatically leave locator mode after you store, recall, or clear a locator and return to the Track Status mode
"off"- to remain in Locator mode after you store, recall, or clear a locator.
6. Press F6 for "Exit" to confirm your changes.
1. Hold down SHIFT and press F4.
2. If you don't see "System" above F1, press PAGE until you do.
3. Press F1[System].
4. If F1"Param1" isn't highlighted, press F1.
5. You can set the RTN TO TR STATUS SW box to:
"on"- to automatically leave locator mode after you store, recall, or clear a locator and return to the Track Status mode
"off"- to remain in Locator mode after you store, recall, or clear a locator.
6. Press F6 for "Exit" to confirm your changes.