VGA-5: How do I restore the factory settings?

You can restore all settings or only selected data on the VGA-5 to their factory settings.

Note: Any data included in the selected reset range will be lost when the Factory Reset is performed.

1. Turn off the power.
2. While holding down [WRITE], turn on the power.
   [MANUAL] and [A/B] flash.

3. Select the data you want to restore:

   • All settings: Proceed to step 4 without pressing a button.
     This restores all forty memories, the Pedal Hold setting, MIDI settings, and Noise Suppressor setting.
   • Pedal Hold, MIDI, and Noise Suppressor settings only: Press [A/B].
     The [A/B] indicator goes out, and only [MANUAL] flashes.
   • Memories only: Press [MANUAL].
     The [MANUAL] indicator goes out, and only [A/B] flashes. This restores all forty memories.

   To cancel the Factory Reset, press a memory number button.

4. Press [WRITE] to execute the Factory Reset.
   The [WRITE] indicator flashes.
   When the Factory Reset is complete, the VGA-5 returns to Memory Number 1.

   Note: When restoring all settings or only the memories, the tone settings in the memories are restored to the settings listed in the “VGA-5 MEMORY SHEET” in the VGA-5 Owner’s Manual.