You must save any changes you make if you wish to use them again in the future. Use the following procedure to save your current settings as a Patch:
1. Hold down the WRITE button until the display begins to blink.
2. Continue to hold down the WRITE button and use the A/B button, the 1-8 buttons, and ENTER to select the desired location. For example, to select location b85, press A/B repeatedly until the display shows b--. Then press 8 and 5, followed by ENTER.
1. Hold down the WRITE button until the display begins to blink.
2. Continue to hold down the WRITE button and use the A/B button, the 1-8 buttons, and ENTER to select the desired location. For example, to select location b85, press A/B repeatedly until the display shows b--. Then press 8 and 5, followed by ENTER.