User patterns will remember which Drum Kit was used during the original pattern recording process. If you would like to change the existing Drum Kit that is being used in a User pattern, follow the steps below:
1. Select a User pattern (201-400).
2. Hold SHIFT and press PAD 6[PATTERN EDIT], then release SHIFT.
3. Press the REC button.
4. Hold SHIFT and press DRUM A/B[DRUM KIT].
5. While continuing to hold SHIFT, release DRUM A/B[DRUM KIT], then turn the VALUE dial to select a desired KIT (1-128).
6. Release SHIFT and press START.
7. Press STOP/CONT.
8. Hold SHIFT and press PAD 5[PATTERN PLAY] to return to pattern play mode.
The Kit is now stored into the pattern.
1. Select a User pattern (201-400).
2. Hold SHIFT and press PAD 6[PATTERN EDIT], then release SHIFT.
3. Press the REC button.
4. Hold SHIFT and press DRUM A/B[DRUM KIT].
5. While continuing to hold SHIFT, release DRUM A/B[DRUM KIT], then turn the VALUE dial to select a desired KIT (1-128).
6. Release SHIFT and press START.
7. Press STOP/CONT.
8. Hold SHIFT and press PAD 5[PATTERN PLAY] to return to pattern play mode.
The Kit is now stored into the pattern.