Each User pattern in the DR-880 can have a specified tempo assigned to it. Use the following steps to specify the tempo for a User pattern:
1. Press EXIT a few times to confirm you are not in Edit mode.
2. Select a desired User pattern.
3. Press EDIT.
4. Press CURSOR < > to select "PATTERN."
5. Press ENTER.
6. Press CURSOR < > to select "INFO."
7. Press ENTER.
8. Press CURSOR Down to select TEMPO.
9. Turn the VALUE dial to set the tempo.
10. Press EXIT three times when finished.
1. Press EXIT a few times to confirm you are not in Edit mode.
2. Select a desired User pattern.
3. Press EDIT.
4. Press CURSOR < > to select "PATTERN."
5. Press ENTER.
6. Press CURSOR < > to select "INFO."
7. Press ENTER.
8. Press CURSOR Down to select TEMPO.
9. Turn the VALUE dial to set the tempo.
10. Press EXIT three times when finished.