Follow these steps to assign a Patch to one of the sixteen parts of a Performance:
1. Press PERFORM.
2. Press PART SELECT.
3. Use the Part buttons 0-9 below the display to select the desired Part .
Note: To select Parts 11-16, hold SHIFT while pressing the corresponding Part buttons:
SHIFT + 1 = Part 11
SHIFT + 2 = Part 12
SHIFT + 3 = Part 13
SHIFT + 4 = Part 14
SHIFT + 5 = Part 15
SHIFT + 6 = Part 16
4. Once the Part number is selected, hold SHIFT and CURSOR left or right to select the desired Patch category.
5. Press VALUE +/- to select the desired Patch from within that category.
6. Repeat steps 3 through 5 to select Patches for other Parts with the Performance.
1. Press PERFORM.
2. Press PART SELECT.
3. Use the Part buttons 0-9 below the display to select the desired Part .
Note: To select Parts 11-16, hold SHIFT while pressing the corresponding Part buttons:
SHIFT + 1 = Part 11
SHIFT + 2 = Part 12
SHIFT + 3 = Part 13
SHIFT + 4 = Part 14
SHIFT + 5 = Part 15
SHIFT + 6 = Part 16
4. Once the Part number is selected, hold SHIFT and CURSOR left or right to select the desired Patch category.
5. Press VALUE +/- to select the desired Patch from within that category.
6. Repeat steps 3 through 5 to select Patches for other Parts with the Performance.