Use the following procedure to assign the TUNER On/Off function to the CTL pedal in a User Patch.
1. Select a USER patch.
2. Press PEDAL ASSIGN.
3. Press the PARAMETER Right button seven times to select "CTL PEDAL."
4. Turn the PATCH/VALUE dial to select "P08 TUNER."
5. Press WRITE twice to store the new setting to the patch.
1. Select a USER patch.
2. Press PEDAL ASSIGN.
3. Press the PARAMETER Right button seven times to select "CTL PEDAL."
4. Turn the PATCH/VALUE dial to select "P08 TUNER."
5. Press WRITE twice to store the new setting to the patch.