Use the Factory Preset operation to clear all data stored in the internal memory of the Roland XP-60 or XP-80 and restore the factory-default settings. The current Chain settings are also discarded.
This operation clears all data stored in internal memory. Before proceeding, save any data that you want to keep to an external MIDI device or memory card.
- Press [UTILITY] to display the Utility Menu.
- Open the Factory Preset screen using one of the following methods:
- Press [F6] (Menu) to select Menu 3, and then press [F1] (Preset).
- Move the cursor to “8 Factory,” and then press [ENTER].
- Press numeric key [8], and then press [ENTER].
Press [F6] (Execute).
If the “Write Protect ON” message appears, set the Write Operation parameter to “OFF.” Press [EXIT] or [ENTER] to close the message, and then press [F6] (Execute) again.The Factory Preset operation begins. When the operation is complete, the PATCH Play screen appears.
Note: After the Factory Preset operation, the Write Operation parameter remains set to “OFF” until the power is turned off.