The Fantom-X contains a sampler for recording audio sources from a microphone, CD and so on. Use the following steps to sample:
- Connect a microphone or CD player to the appropriate input on the back of the Fantom-X.
- While holding SHIFT, press MIX IN.
- Turn the VALUE dial to select the appropriate input selection.
Note: If you are using a microphone, first confirm that any connected amplifiers or monitors are turned down before selecting MICROPHONE. - Press the SAMPLING button so it is flashing.
- Press F1 (Sampling).
- Speak into the microphone or play your external sound source while turning the LEVEL control knob clockwise to adjust your input levels.
Note: If the levels are too high, the PEAK indicator next to the LEVEL control knob lights. If this occurs, reduce the input level. - Press F8 (Start).
- Perform or play whatever it is you are sampling.
- Press F7 (Stop) when you are finished.
- Press and hold F8 (Preview) to hear the sample.