Use the following steps to assign instruments to the direct outs in the TD-12:
1. Press SETUP.
2. Press F2 (OUTPUT).
3. Hit the pad that you want to assign to a direct out.
4. Turn the VALUE dial to select the output.
5. Repeat Steps 3 and 4 for any of the remaining pads.
6. Press KIT when you're finished. The new settings are saved automatically.
1. Press SETUP.
2. Press F2 (OUTPUT).
3. Hit the pad that you want to assign to a direct out.
4. Turn the VALUE dial to select the output.
5. Repeat Steps 3 and 4 for any of the remaining pads.
6. Press KIT when you're finished. The new settings are saved automatically.