User patterns will remember which Drum Kit was used during the original pattern recording process. If you would like to change the existing Drum Kit that is being used in a User pattern, follow the steps below:
1. Select a User pattern (401-800).
2. Press the REC button.
3. Press the DRUM KIT button.
4. Turn the VALUE dial to select a desired KIT (1-128).
5. Press START.
6. Press STOP.
The Kit is now stored into the pattern.
1. Select a User pattern (401-800).
2. Press the REC button.
3. Press the DRUM KIT button.
4. Turn the VALUE dial to select a desired KIT (1-128).
5. Press START.
6. Press STOP.
The Kit is now stored into the pattern.