You can choose any pattern to be called up immediately after the DR-880 is powered on. This is referred to as the "power on pattern." Use the following steps to specify a power on pattern:
1. Press Exit a few times to confirm you are not in Edit mode.
2. Press the Cursor Left or Right buttons (< >) to select "PLAY OPTION."
3. Press ENTER.
4. Press Cursor Down to select "PowerOn Ptn."
5. Turn the VALUE dial to select the desired pattern.
6. When finished, press EXIT twice.
1. Press Exit a few times to confirm you are not in Edit mode.
2. Press the Cursor Left or Right buttons (< >) to select "PLAY OPTION."
3. Press ENTER.
4. Press Cursor Down to select "PowerOn Ptn."
5. Turn the VALUE dial to select the desired pattern.
6. When finished, press EXIT twice.