PCR-300, PCR-500, PCR-800: How Do I Save a Control Map?

If you want to keep the changes you’ve made to the current memory, use the following procedure to save the control map. You can save the control map in memory numbers 1–F. You can’t save to memory
number 0.
* If you’ve changed the settings of the current memory, be sure to “SAVE” if you want to keep your changes.

1. Press the [EDIT] button so it’s lit.
   
   The display will indicate “EDIT.”
   
2. Turn the VALUE knob to make the display indicate “SAVE.”
   
3. Press the [ENTER] button.
   * If the display indicates “PTC,” the Protect setting is ON, and you’ll be unable to save the memory. Turn the Protect setting OFF, and repeat the procedure from step 1.
   
4. Use the VALUE knob or controllers [A2]–[A8] and [B1]–[B8] to specify the memory number “1”–”F” in which you want to save the control map.
   The specified memory number will blink in the display.
5. Press [ENTER] to save the control map.
   * If you press another button instead of the [ENTER] button, the Save operation will be cancelled.