Use the following procedure to assign Rotary Control to an DP-2/DP-8/DP-10 pedal connected to the RD-300GX:
1. Connect the DP-2 to the CONTROL socket on the back of the keyboard.
2. On the RD-300GX, press EDIT so it is lit.
3. Use the INC/DEC buttons to select "COMMON."
4. Press ENTER.
5. Use the INC/DEC CURSOR to select "CTRL PEDAL FUNC."
6. Press ENTER.
7. Use the INC/DEC buttons to select “MFX SW."
8. Press EDIT so it is not lit.
Your DP-2 pedal will now function as a Rotary Fast/Slow control on the Organ Tones that have the Rotary effect assigned to them.
NOTE: You will have to save your settings in a SET-UP before you turn off the RD-300GX. See "Saving A SetUp" for instructions.
1. Connect the DP-2 to the CONTROL socket on the back of the keyboard.
2. On the RD-300GX, press EDIT so it is lit.
3. Use the INC/DEC buttons to select "COMMON."
4. Press ENTER.
5. Use the INC/DEC CURSOR to select "CTRL PEDAL FUNC."
6. Press ENTER.
7. Use the INC/DEC buttons to select “MFX SW."
8. Press EDIT so it is not lit.
Your DP-2 pedal will now function as a Rotary Fast/Slow control on the Organ Tones that have the Rotary effect assigned to them.
NOTE: You will have to save your settings in a SET-UP before you turn off the RD-300GX. See "Saving A SetUp" for instructions.