Use the following steps to select the basic (drum kit) MIDI channel for the TD-10:
1. Press SETUP.
2. Press F2 (MIDI).
3. If necessary, press the cursor up button to select the "All Drums" channel.
4. Turn the VALUE dial to select the desired channel. By default, the All Drums channel is 10.
5. Press EXIT when you're finished.
1. Press SETUP.
2. Press F2 (MIDI).
3. If necessary, press the cursor up button to select the "All Drums" channel.
4. Turn the VALUE dial to select the desired channel. By default, the All Drums channel is 10.
5. Press EXIT when you're finished.