The FR-7xb bellows settings can be changed so that there is no need to operate the bellows to get a sound. Use the following procedure to make the settings:
1. Press MENU.
2. Rotate the DATA/ENTER knob to display "System 10."
3. Press the DATA/ENTER knob to select the System menu.
4. Rotate the DATA/ENTER knob to select "Bellows Curves."
5. Press the DATA/ENTER knob.
6. Rotate the DATA/ENTER knob to select the desired Bellows setting.
NOTE: Selecting FixedLow, FixedMed or FixedHigh will allow you to play the accordion without moving the bellows.
NOTE: If you wish to make the settings permanent, please complete steps 7 and 8.
7. Press and hold the MENU/WRITE button to display the "WRITE" menu. Release the MENU/WRITE button.
8. Press the MENU/WRITE button (do not hold it down) to confirm and complete the "write" function.
NOTE: "Executing... do NOT power off!" will be displayed during the "write" procedure.
9. Press EXIT several times to return to the main display.
1. Press MENU.
2. Rotate the DATA/ENTER knob to display "System 10."
3. Press the DATA/ENTER knob to select the System menu.
4. Rotate the DATA/ENTER knob to select "Bellows Curves."
5. Press the DATA/ENTER knob.
6. Rotate the DATA/ENTER knob to select the desired Bellows setting.
NOTE: Selecting FixedLow, FixedMed or FixedHigh will allow you to play the accordion without moving the bellows.
NOTE: If you wish to make the settings permanent, please complete steps 7 and 8.
7. Press and hold the MENU/WRITE button to display the "WRITE" menu. Release the MENU/WRITE button.
8. Press the MENU/WRITE button (do not hold it down) to confirm and complete the "write" function.
NOTE: "Executing... do NOT power off!" will be displayed during the "write" procedure.
9. Press EXIT several times to return to the main display.