Use the following steps to view the current version in the RC-3.
1. Turn the RHYTHM and LOOP OUTPUT knobs counterclockwise to the MIN position.
2. Press and hold the DOWN arrow and RHYTHM ON/OFF buttons simultaneously and then turn on the power by inserting a cable into the OUTPUT A/MONO jack.
The version will appear in the display. For example, if the version is at 1.10, "1" followed by "10" will alternate in the display.
3. When you're finished, disconnect the cable from the L/MONO output to turn off the power.
Caution: Never perform an update if the product is already up-to-date.
1. Turn the RHYTHM and LOOP OUTPUT knobs counterclockwise to the MIN position.
2. Press and hold the DOWN arrow and RHYTHM ON/OFF buttons simultaneously and then turn on the power by inserting a cable into the OUTPUT A/MONO jack.
The version will appear in the display. For example, if the version is at 1.10, "1" followed by "10" will alternate in the display.
3. When you're finished, disconnect the cable from the L/MONO output to turn off the power.
Caution: Never perform an update if the product is already up-to-date.