Use the following procedure to initialize the GAIA SH-01 and restore its factory settings.
Items that are initialized by the factory reset
- All user patches
- Phrase data of the recorder
- System settings
Caution: A Factory Reset erases all of your onboard patches and settings. Be sure to back up any work you wish to keep before proceeding.
- Turn off the GAIA SH-01’s power.
- While holding down the [PRESET PATCH] button and the [USER PATCH] button, turn on the GAIA SH-01’s power.
Important: Continue holding down the [PRESET PATCH] button and [USER PATCH] button until the [TAP TEMPO] button goes out.
If you decide to cancel the operation, press the [CANCEL/SHIFT] button. - Press the blinking [WRITE] button.
The NUMBER buttons will light sequentially starting with [1]; when the NUMBER [8] button lights, the operation has been completed.
When the factory reset is finished, the GAIA SH-01 will return to normal operation.