By connecting a foot switch (BOSS FS-5U/5L or FS-6; sold separately), you’ll be able to use your foot to switch between channels, turn EFX, Reverb, and Delay on/off, and control the Looper function.
- For details on connections and settings when using a latch-type foot switch (BOSS FS-5L; sold separately), refer to the ”Using a Latch-type Foot Switch” section in the CUBE-40XL/CUBE-80XL Owner's Manual.
When connecting two footswitches to one jack, you must use a specific type of cable called an "insert cable." One end of this cable has a single TRS connector (stereo plug), and the other end has two TS connectors (mono plugs).
- Connect the TRS end into the footswitch input jack.
- Connect each TS end into a BOSS FS-5U footswitch.
Alternatively, you could connect a BOSS FS-6 to the footswitch jack with a single cable that has TRS (stereo) connectors on each end.
- Connect one end of the TRS cable into the footswitch input jack.
- Plug the other end of the TRS cable into the FS-6 A&B (center) jack.