To initialize the BOSS RC-300 Loop Station, perform a Factory Reset. The system settings, the phrase memories, or both can be returned to their factory-set state.
"SYSTEM + MEMORY" and "MEMORY" erase all phrase memories, including the demo data (Phrase Memory 90-99). Erased data cannot be recovered. Back up important phrases to a computer as described in "Using USB to Exchange Files with Your Computer (USB Mass Storage)" in the RC-300 Owner's Manual.
If "Data Damaged!" appears and the unit does not operate correctly, select "SYSTEM + MEMORY" in step 3.
- Turn off the power.
- While holding down the [WRITE] and [EXIT] buttons, turn on the power.
The Factory Reset screen appears. - Use the [MEMORY/VALUE] knob to select the range:
- SYSTEM + MEMORY: Resets the system settings and erases all phrase memories.
- SYSTEM: Resets the system settings only. Phrase memories are kept.
- MEMORY: Erases all phrase memories only.
- Press the [WRITE] button.
- When "Completed!" appears, turn off the power.
If "Data Damaged!" appears and the unit does not operate correctly, select "SYSTEM + MEMORY".