There are four software items to install from the included SONAR VS Installation DVD-ROM and the SONAR V-STUDIO 100 Driver CD-ROM:
SONAR VS Installation DVD-ROM contents:
- Sonar VS Software (Windows only)
- VS Production Pack
- Guitar Rig 3 LE
SONAR V-STUDIO 100 Driver CD-ROM contents:
- SONAR V-STUDIO 100 drivers for PC and Mac
NOTE:
• When installing, you must log on as a user with administrative privileges on your computer.
• Close system monitoring/anti-virus software before installing. If system monitoring software such as anti-virus programs are installed on your computer, you must close them until you’ve finished installing SONAR.
SONAR VS Software and VS Production Pack Software Install:
- Close down all software on your computer.
- Disconnect any USB connecting devices—except your keyboard and mouse.
This includes any hubs, external drives, etc. - Place the SONAR V-Studio 100 Installation DVD-ROM into your disc drive.
The "VS Production Pack" AutoRun will appear if you have AutoRun enabled.
* If the AutoRun appears, proceed with the on-screen installation instructions and proceed to Step 5. - If the AutoRun does not appear:
a. From the Windows Start menu, navigate to My Computer or Computer.
b. Right-click on your DVD-ROM titled "VS-100 DVD" and click "Explore"
c. Right-click on VS_Production_Pack_Setup.exe and click "Open"
d. Proceed with the on screen installation instructions. - When arriving on the Select Components screen, make sure you have selected to install the "VS-100 Control Surface plug-in" and proceed with the on screen installation instructions.
- When you arrive at the "Completing the VS Production Pack Setup Wizard" screen, make sure you have placed a check next to "Launch SONAR VS Installer" and then click [Finish]. The "Welcome to SONAR VS Setup Wizard" will appear. Follow the on screen installation instructions.
- When the “Completing the SONAR VS Setup Wizard” screen appears, click [Finish].
Both the VS Production Pack and SONAR VS are now installed. At this point, proceed to the “VS-100 Driver Install” below.
VS-100 Driver Install:
- Close down all software on your computer.
- Disconnect any USB connecting devices—except your keyboard and mouse.
This includes any hubs, external drives, etc. - Place the SONAR V-STUDIO 100 Driver CD-ROM into your disc drive.
- On the V-STUDIO 100 DVD-ROM, open the “Drivers” folder and then open the folder pertaining to your computer’s operating system.
- Double click the installer (“Setup.exe”) file to begin the driver installation.
- Follow the instructions on screen and connect the VS-100 hardware when prompted to complete driver installation.