There are four software items to install from the included SONAR VS Installation DVD-ROM and the SONAR V-STUDIO 100 Driver CD-ROM:
SONAR VS Installation DVD-ROM contents:
1. Sonar VS Software (Windows only)
2. VS Production Pack
3. Guitar Rig 3 LE
SONAR V-STUDIO 100 Driver CD-ROM contents:
1. SONAR V-STUDIO 100 drivers for PC and Mac
NOTE:
• When installing, you must log on as a user with administrative privileges on your computer.
• Close system monitoring/anti-virus software before installing. If system monitoring software such as anti-virus programs are installed on your computer, you must close them until you’ve finished installing SONAR.
SONAR VS Software and VS Production Pack Software Install:
1. Close down all software on your computer.
2. Disconnect any USB connecting devices—except your keyboard and mouse. This includes any hubs, external drives, etc.
3. Place the SONAR V-Studio 100 Installation DVD-ROM into your disc drive. The "VS Production Pack" AutoRun will appear if you have AutoRun enabled.
4. If the AutoRun appears, proceed with the on-screen installation instructions and proceed to Step 6.
5. If the AutoRun does not appear:
a. From the Windows Start menu, navigate to My Computer or Computer.
b. Right-click on your DVD-ROM titled "VS-100 DVD" and click "Explore"
c. Right-click on VS_Production_Pack_Setup.exe and click "Open"
d. Proceed with the on screen installation instructions.
6. When arriving on the Select Components screen, make sure you have selected to install the "VS-100 Control Surface plug-in" and proceed with the on screen installation instructions.
7. When you arrive at the "Completing the VS Production Pack Setup Wizard" screen, make sure you have placed a check next to "Launch SONAR VS Installer" and then click [Finish]. The "Welcome to SONAR VS Setup Wizard" will appear. Follow the on screen installation instructions.
9. When the “Completing the SONAR VS Setup Wizard” screen appears, click [Finish].
Both the VS Production Pack and SONAR VS are now installed. At this point, proceed to the “VS-100 Driver Install” below.
VS-100 Driver Install:
1. Close down all software on your computer.
2. Disconnect any USB connecting devices—except your keyboard and mouse. This includes any hubs, external drives, etc.
3. Place the SONAR V-STUDIO 100 Driver CD-ROM into your disc drive.
4. On the V-STUDIO 100 DVD-ROM, open the “Drivers” folder and then open the folder pertaining to your computer’s operating system.
5. Double click the installer (“Setup.exe”) file to begin the driver installation.
6. Follow the instructions on screen and connect the VS-100 hardware when prompted to complete driver installation.
SONAR VS Installation DVD-ROM contents:
1. Sonar VS Software (Windows only)
2. VS Production Pack
3. Guitar Rig 3 LE
SONAR V-STUDIO 100 Driver CD-ROM contents:
1. SONAR V-STUDIO 100 drivers for PC and Mac
NOTE:
• When installing, you must log on as a user with administrative privileges on your computer.
• Close system monitoring/anti-virus software before installing. If system monitoring software such as anti-virus programs are installed on your computer, you must close them until you’ve finished installing SONAR.
SONAR VS Software and VS Production Pack Software Install:
1. Close down all software on your computer.
2. Disconnect any USB connecting devices—except your keyboard and mouse. This includes any hubs, external drives, etc.
3. Place the SONAR V-Studio 100 Installation DVD-ROM into your disc drive. The "VS Production Pack" AutoRun will appear if you have AutoRun enabled.
4. If the AutoRun appears, proceed with the on-screen installation instructions and proceed to Step 6.
5. If the AutoRun does not appear:
a. From the Windows Start menu, navigate to My Computer or Computer.
b. Right-click on your DVD-ROM titled "VS-100 DVD" and click "Explore"
c. Right-click on VS_Production_Pack_Setup.exe and click "Open"
d. Proceed with the on screen installation instructions.
6. When arriving on the Select Components screen, make sure you have selected to install the "VS-100 Control Surface plug-in" and proceed with the on screen installation instructions.
7. When you arrive at the "Completing the VS Production Pack Setup Wizard" screen, make sure you have placed a check next to "Launch SONAR VS Installer" and then click [Finish]. The "Welcome to SONAR VS Setup Wizard" will appear. Follow the on screen installation instructions.
9. When the “Completing the SONAR VS Setup Wizard” screen appears, click [Finish].
Both the VS Production Pack and SONAR VS are now installed. At this point, proceed to the “VS-100 Driver Install” below.
VS-100 Driver Install:
1. Close down all software on your computer.
2. Disconnect any USB connecting devices—except your keyboard and mouse. This includes any hubs, external drives, etc.
3. Place the SONAR V-STUDIO 100 Driver CD-ROM into your disc drive.
4. On the V-STUDIO 100 DVD-ROM, open the “Drivers” folder and then open the folder pertaining to your computer’s operating system.
5. Double click the installer (“Setup.exe”) file to begin the driver installation.
6. Follow the instructions on screen and connect the VS-100 hardware when prompted to complete driver installation.