System exclusive information can be used to store data such as Patch and
Performance parameters. Use the following procedure to enable the JV-80/90/1000
to receive system exclusive data:
1) Press WRITE.
2) Use the CURSOR RIGHT button to select "PROTECT."
3) Press ENTER.
4) Use PARAMETER SLIDER 1 to change the "INTERNAL" memory protect value to
"OFF."
5) Use PARAMETER SLIDER 2 to change the "EXCLUSIVE" memory protect value to
"OFF."
6) Press EXIT twice.
7) Press MIDI.
8) Use the UP and DOWN ARROW buttons to select the "SYS-EX" display screen.
9) Use PARAMETER SLIDER 2 to select the appropriate Unit # (usually 17).
10) Send the information from your sequencer. When the sequencer is finished
sending data, you will be able to access the new Patches, Performance
parameters, etc. in the JV-80/90/1000.
Performance parameters. Use the following procedure to enable the JV-80/90/1000
to receive system exclusive data:
1) Press WRITE.
2) Use the CURSOR RIGHT button to select "PROTECT."
3) Press ENTER.
4) Use PARAMETER SLIDER 1 to change the "INTERNAL" memory protect value to
"OFF."
5) Use PARAMETER SLIDER 2 to change the "EXCLUSIVE" memory protect value to
"OFF."
6) Press EXIT twice.
7) Press MIDI.
8) Use the UP and DOWN ARROW buttons to select the "SYS-EX" display screen.
9) Use PARAMETER SLIDER 2 to select the appropriate Unit # (usually 17).
10) Send the information from your sequencer. When the sequencer is finished
sending data, you will be able to access the new Patches, Performance
parameters, etc. in the JV-80/90/1000.