The GT-3 has a Manual Mode which allows the #1 - #4 pedals to be used as On /
Off switches for specified effects. By using the Manual Mode various effects
can be turned on or off without changing the Patch Numbers. Use the following
procedure to specify Manual Mode settings:
1) Press MANUAL so it is lit to enter the Manual Mode.
2) Use the PARAMETER cursor buttons to select the desired pedal.
3) Use the VALUE dial to set the function of that pedal.
4) Press MANUAL so it is not lit to exit the Manual Mode.
NOTE: The Manual Mode settings are global and are not saved in a Patch.
Changing Patches will not affect the Manual Mode settings.
Off switches for specified effects. By using the Manual Mode various effects
can be turned on or off without changing the Patch Numbers. Use the following
procedure to specify Manual Mode settings:
1) Press MANUAL so it is lit to enter the Manual Mode.
2) Use the PARAMETER cursor buttons to select the desired pedal.
3) Use the VALUE dial to set the function of that pedal.
4) Press MANUAL so it is not lit to exit the Manual Mode.
NOTE: The Manual Mode settings are global and are not saved in a Patch.
Changing Patches will not affect the Manual Mode settings.