The following procedure can be used to transfer data to and from an M-256D/E or
M-512E RAM card:
1) Press UTILITY and CURSOR to the top line of the display.
2) Use the DATA dial to select "Data card."
3) CURSOR to the bottom line to select the function: "INT>CARD" or "CARD>INT."
4) Press ENTER to send the data.
Note: If selecting "INT>CARD" and if the card has not been formatted you will
need to press ENTER two times.
M-512E RAM card:
1) Press UTILITY and CURSOR to the top line of the display.
2) Use the DATA dial to select "Data card."
3) CURSOR to the bottom line to select the function: "INT>CARD" or "CARD>INT."
4) Press ENTER to send the data.
Note: If selecting "INT>CARD" and if the card has not been formatted you will
need to press ENTER two times.