JW-50: Accessing Variation Tones from the Front Panel or via MIDI.

The JW-50's GS sound source contains many Variation Tones. Use the following procedure to access the Variation Tones from the front panel:

1. Press TONE.
2. Press EDIT (F1).
3. CURSOR to "Source Tone" and use the VALUE DIAL to select the desired Tone.
4. CURSOR to "Variation" and use the VALUE DIAL to select the desired Variation.

You can access the JW-50's Variation Tones via MIDI by using Controller 0 (Bank Select) and program change messages. Use the following procedure to access the Variation Tones via MIDI:

1. Send a Controller 0 message from your sequencer, and assign a value for the bank you want to access. Capitol Tones are in bank 0, Variation Tones are in banks 1 through 32. The MT-32 emulation Tones are in bank 127.*
2. Immediately following the Controller 0 message, send the desired program change message.
   *There is a chart on pages 6-9 through 6-12 of the JW-50 Owners Manual that lists the Variation Tones and their Controller 0 values.