Use the following procedure to select the location of the effects processor:
1) Press EZ ROUTING.
2) Press F1-F4 ON/OFF. The functions appear in the display.
3) Press F3[FX].
4) Use the UP and DOWN CURSOR buttons to select "Location" (location in the
mixer) and "Patch" (the patch number).
*On the 3100Pro, use the LEFT and RIGHT CURSOR buttons to switch between
Effect1 and Effect2).
5) Rotate the VALUE dial to select the location in the mixer and patch number.
1) Press EZ ROUTING.
2) Press F1-F4 ON/OFF. The functions appear in the display.
3) Press F3[FX].
4) Use the UP and DOWN CURSOR buttons to select "Location" (location in the
mixer) and "Patch" (the patch number).
*On the 3100Pro, use the LEFT and RIGHT CURSOR buttons to switch between
Effect1 and Effect2).
5) Rotate the VALUE dial to select the location in the mixer and patch number.