CDs are a stereo format. This means that you will always designate two tracks (left and right) to be burned on the CD-R.
Use the following procedure to designate a left and right track for creating a CD:
- Hold SHIFT and press F1 [SONG] and the "Song Menu" screen will be displayed. If it is not, press F6 [EXIT].
- Press PAGE until CD WT appears above F3.
- Press F3 [CD WT] and "CD Write ready?" will be displayed.
- Press YES and "Store Current?" will be displayed. If you have made any changes to your song that have not been saved, press YES; otherwise, press NO.
- Press F1 [SelTr] and the "Select Track" screen will be displayed.
- Use the TIME/VALUE dial to select the track (and Virtual Track) that will become the left side of the CD and press F3 [Sel L] to designate that track as the left track of the CD.
- Use the TIME/VALUE dial to select the track (and Virtual Track) that will become the right side of the CD and press F4 [Sel R].
- Press F1 [Back] and the tracks you selected will be displayed under "L-Ch Source Track" and "R-Ch Source Track."
- Use the UP, DOWN, LEFT, and RIGHT CURSOR buttons to move the cursor to "Finalize", and rotate the TIME/VALUE dial to select Off, On, or OnlyFin.
- Press F4[EXEC]. Press YES twice to agree to the licensing conditions and start recording to CD.