Digital connection of an ADAT to the VM-3100PRO is accomplished with use of the
DIF-AT. The procedure is as follows:
1) Connect one end of the RMDB II cable to the "RMDB II" connector o the
VM-3100PRO.
2) Connect the other end of the RMDB II cable to "RMDB2" connector on the DIF-AT
3) Connect one end of the SYNC cable to the ADAT "SYNC OUT" connector.
4) Connect the other end of the SYNC cable to the "SYNC" connector on the
DIF-AT.
5) Connect the fiber optic cables from the "OUT" & "IN" plugs ADAT to the
DIF-AT "IN" & "OUT" connectors respectively.
DIF-AT. The procedure is as follows:
1) Connect one end of the RMDB II cable to the "RMDB II" connector o the
VM-3100PRO.
2) Connect the other end of the RMDB II cable to "RMDB2" connector on the DIF-AT
3) Connect one end of the SYNC cable to the ADAT "SYNC OUT" connector.
4) Connect the other end of the SYNC cable to the "SYNC" connector on the
DIF-AT.
5) Connect the fiber optic cables from the "OUT" & "IN" plugs ADAT to the
DIF-AT "IN" & "OUT" connectors respectively.