Use the following procedure to send signal from a specific channel to the BUS
OUT jacks:
1) Press the SELECT button for the channel whose signal you want sent to the
BUS OUT jacks.
2) Press BUS ASSIGN.
3) Press DOWN CURSOR to select "3/4 BUS."
4) Rotate the VALUE dial to place a check mark.
OUT jacks:
1) Press the SELECT button for the channel whose signal you want sent to the
BUS OUT jacks.
2) Press BUS ASSIGN.
3) Press DOWN CURSOR to select "3/4 BUS."
4) Rotate the VALUE dial to place a check mark.