The following procedure can be used to clear the internal memory and reload the factory settings:
CAUTION: All USER information will be lost. Be sure to back up any information you wish to keep.
The EM-2000 does not have a "hard reset" function to load the factory settings. User Program Sets, MIDI Sets and Custom Sets need to be loaded from the EM-2000 factory ZIP disk to restore factory default settings. Use the following procedure to restore the original factory data from the factory ZIP Disk:
Use the following procedure to prepare the EM-2000 for loading the factory ZIP disk files:
- Turn the unit off.
- Insert the factory ZIP Disk into the drive.
- Turn the unit on.
Now select the desired factory sets:
To Load User Program Sets:
- Press F5 [Disk.]
- Press F1 [Load.]
- Press PAGE ^ / v to select "USR PRG."
- Press UPPER 1[Execute] to load the User Program data.
- Press F5 [Exit] to return to the Master page.
To Load MIDI sets:
- Press F5 [Disk.]
- Press F1 [Load.]
- Press PAGE ^ / v to select "MIDI Set."
- Press UPPER 1[Execute] to load the MIDI Set data.
- Press F5 [Exit] to return to the Master page.
To Load Custom Sets to the Custom memories:
- Press F5 [Disk.]
- Press SHIFT and F3 [Utility.]
- Press F1[CstLd.]
- Turn the ACCOMP/GROUP knob to select Custom Set "US-STL01."
- Press UPPER 1 [LOAD] to load this Custom Set.
- Press LOWER 1 to confirm the loading procedure.
- Press F5 [Exit] to return to the Master page.