The DR-5 uses Kits to select the desired instruments for each track (TRACK 1,
TRACK 2, TRACK 3 and DRUM). Before you begin composing a pattern, you need to
select one of the 64 available Kits. The first 48 (P00-P47) are Preset Kits and
can not be modified. There are 16 User Kits (U00-U15) that are programmable
and can be edited. Use the following procedure to select a Kit for your pattern:
1) Press KIT.
2) Use the DATA dial to select one of the 64 Kits. Each kit consists of three
instrument tracks and a drum track.
3) Use the TRACK SEL button, located under the KIT button, to hear the
instruments and drums assigned to each track. The [TRACK SELECT] box in the
display screen will display the current track (TRACK 1, TRACK 2, TRACK 3 or
DRUM.)
NOTE: Pages 11-7 of the Owners Manual contains a chart that indicates the
sounds that are assigned to each track in the kits.
NOTE: To permanently assign a Kit to a pattern, select the Kit while in record
mode.
TRACK 2, TRACK 3 and DRUM). Before you begin composing a pattern, you need to
select one of the 64 available Kits. The first 48 (P00-P47) are Preset Kits and
can not be modified. There are 16 User Kits (U00-U15) that are programmable
and can be edited. Use the following procedure to select a Kit for your pattern:
1) Press KIT.
2) Use the DATA dial to select one of the 64 Kits. Each kit consists of three
instrument tracks and a drum track.
3) Use the TRACK SEL button, located under the KIT button, to hear the
instruments and drums assigned to each track. The [TRACK SELECT] box in the
display screen will display the current track (TRACK 1, TRACK 2, TRACK 3 or
DRUM.)
NOTE: Pages 11-7 of the Owners Manual contains a chart that indicates the
sounds that are assigned to each track in the kits.
NOTE: To permanently assign a Kit to a pattern, select the Kit while in record
mode.