The Roland TD-10 allows you to play using brushes when a PD-100 or PD-120 is
connected. Use the following procedure to configure the TD-10 to be used with
brushes:
1) Select either preset Kit #7 or preset Kit #37, which are already set up for
brushes.
2) For other Kits, press FUNCTION [F2] followed by SELECT [F3].
3) Use the INC/DEC buttons to select "BRUSHES."
NOTE: Use only nylon brushes.
connected. Use the following procedure to configure the TD-10 to be used with
brushes:
1) Select either preset Kit #7 or preset Kit #37, which are already set up for
brushes.
2) For other Kits, press FUNCTION [F2] followed by SELECT [F3].
3) Use the INC/DEC buttons to select "BRUSHES."
NOTE: Use only nylon brushes.