The Volume / Hold Message Reception Switch determines whether Volume and / or Hold messages are to be received or not. The settings shown in the display and their respective settings are as follows.
On - Volume messages and hold messages are both received.
hld - Hold messages are received, but volume messages are not.
vol - Volume messages are received, but hold messages are not.
off - Neither volume messages nor hold messages are received.
1) Press SELECT four times. The MIDI Rx LED should light up.
2) Press F1.
3) Use the VALUE buttons to select the desired setting.
4) Press PATCH to exit.
On - Volume messages and hold messages are both received.
hld - Hold messages are received, but volume messages are not.
vol - Volume messages are received, but hold messages are not.
off - Neither volume messages nor hold messages are received.
1) Press SELECT four times. The MIDI Rx LED should light up.
2) Press F1.
3) Use the VALUE buttons to select the desired setting.
4) Press PATCH to exit.