Use the following procedure to enable the JX-8P to transmit Program Change
messages:
1) Press MIDI.
2) Press Tone switch 1, then Tone switch 2 to select P.Change.
3) Use the EDIT knob to turn hold on.
MIDI settings must be written into internal memory.
1) Set the protect switch to off.
2) Press WRITE. The display will read WRITTEN MIDI.
3) Set the protect switch back to on.
messages:
1) Press MIDI.
2) Press Tone switch 1, then Tone switch 2 to select P.Change.
3) Use the EDIT knob to turn hold on.
MIDI settings must be written into internal memory.
1) Set the protect switch to off.
2) Press WRITE. The display will read WRITTEN MIDI.
3) Set the protect switch back to on.