MC-505: External Sequencing with the MC-505

Make the following settings to use the MC-505 as a sound module:

1) While holding SHIFT, press NUMBER 12 (MIDI.)
2) Press PAGE < or > until the display reads "SYS: MIDI, Remote Kbd=On."
3) Press DEC or INC or rotate the VALUE dial to change the display to "Remote
Kbd=OFF."
4) Press PAGE > until the display reads "SYS: MIDI, Thru=ON."
5) Press DEC or INC or rotate the VALUE dial to change the display to
"Thru=OFF."
6) Press PAGE > until the display reads "SYS: MIDI Rx SW."
7) Press PART SELECT so it is lit.
8) Press the PART BUTTON for each PART and use the DEC or INC buttons to set
the Midi receive status of each PART.