SDE-2000 DIGITAL DELAY
INPUT LEVEL:
+ dBm ( + 29 dBm max )
-20 dBm ( + 5 dBm max)
INPUT IMPEDANCE:
56 k W
OUTPUT LEVEL:
+4 dBm ( +18 dBm max) / 600 W load
-20 dBm ( - 8 dBm max) / 10 k W load
OUTPUT IMPEDANCE:
100 W / + 4 dBm position
650 W / - 20 dBm position, Mixed output
550 W / - 20 dBm position, Delay output
FEEDBACK SEND:
Level : + 4 dBm (+ 16 dBm max)
Output Impedance : 100 W
FEEDBACK RETURN:
Level : + 4 dBm ( + 19 dBm max)
Input Impedance : 78 k W
MODULATION CV INPUT:
Operating Voltage : 0 ~ +10V ( + 20V, allowable)
Input Impedance : 90 k W
DELAY TIME:
0 to 320 ms
0 to 640 ms (in 1 ms steps)
DELAY ACCURACY:
+ 0.5%
FREQUENCY RESPONSE:
10 Hz to 100 kHz +0, - 1 dB / Direct
10 Hz to 16 kHz +0.5, - 3 dB / Delay, 0 to 320 ms
10 Hz to 100 kHz +0.5, - 3 dB / Delay, 0 to 640 ms
SIGNAL TO NOISE RATIO: (IHF A)at rated input & output
90 dB / Direct
80 dB / Delay
DYNAMIC RANGE (IHF A):
Greater than 112 dB / Direct
90 dB / Delay
TOTAL HARMONIC DISTORTION: (at rated input and output Ref. 1 kHz)
Less than 0.05% / Direct
0.08% typ, 0.2% max / Delay
CONTROLS:
Input Volume
Feedback Level
Delay Output Volume
Modulation Rate
Modulation Depth
SWITCHES:
Bypass
Single Delay
Delay Phase
Delay Range ( x 1, x 2 )
Delay Time Selection Buttons (Up, DOWN)
Modulation Waveform ( ??????? )
Modulation On - Off
Level Selection ( + dBm, - 20 dBm)
Power On - Off
Modulation Rate
Modulation On - Off
CONNECTORS (1/4' Phone Jacks)
Input
Output - Mixed, Delay
Feed Back Send
Feed Back Return
Modulation CV Input
REMOTE CONTROL CAPABILITY (1/4' Phone Jacks)
Delay On - Off (DP - 2, FS - 1)
Single Delay (DP - 2, FS - 1)
Modulation On - Off (DP - 2, FS - 1)
Hold (DP - 2)
POWER CONSUMPTION
27 W (117V), 30 W (220V, 240V)
DIMENSIONS:
482 (W) x 47 (H) x 355 (D) mm (19 x 1 - 7 / 8 x 14 in.)
19' (EIA - 1U) rack mount
WEIGHT:
5.5kg (12 lbs.)
INPUT LEVEL:
+ dBm ( + 29 dBm max )
-20 dBm ( + 5 dBm max)
INPUT IMPEDANCE:
56 k W
OUTPUT LEVEL:
+4 dBm ( +18 dBm max) / 600 W load
-20 dBm ( - 8 dBm max) / 10 k W load
OUTPUT IMPEDANCE:
100 W / + 4 dBm position
650 W / - 20 dBm position, Mixed output
550 W / - 20 dBm position, Delay output
FEEDBACK SEND:
Level : + 4 dBm (+ 16 dBm max)
Output Impedance : 100 W
FEEDBACK RETURN:
Level : + 4 dBm ( + 19 dBm max)
Input Impedance : 78 k W
MODULATION CV INPUT:
Operating Voltage : 0 ~ +10V ( + 20V, allowable)
Input Impedance : 90 k W
DELAY TIME:
0 to 320 ms
0 to 640 ms (in 1 ms steps)
DELAY ACCURACY:
+ 0.5%
FREQUENCY RESPONSE:
10 Hz to 100 kHz +0, - 1 dB / Direct
10 Hz to 16 kHz +0.5, - 3 dB / Delay, 0 to 320 ms
10 Hz to 100 kHz +0.5, - 3 dB / Delay, 0 to 640 ms
SIGNAL TO NOISE RATIO: (IHF A)at rated input & output
90 dB / Direct
80 dB / Delay
DYNAMIC RANGE (IHF A):
Greater than 112 dB / Direct
90 dB / Delay
TOTAL HARMONIC DISTORTION: (at rated input and output Ref. 1 kHz)
Less than 0.05% / Direct
0.08% typ, 0.2% max / Delay
CONTROLS:
Input Volume
Feedback Level
Delay Output Volume
Modulation Rate
Modulation Depth
SWITCHES:
Bypass
Single Delay
Delay Phase
Delay Range ( x 1, x 2 )
Delay Time Selection Buttons (Up, DOWN)
Modulation Waveform ( ??????? )
Modulation On - Off
Level Selection ( + dBm, - 20 dBm)
Power On - Off
Modulation Rate
Modulation On - Off
CONNECTORS (1/4' Phone Jacks)
Input
Output - Mixed, Delay
Feed Back Send
Feed Back Return
Modulation CV Input
REMOTE CONTROL CAPABILITY (1/4' Phone Jacks)
Delay On - Off (DP - 2, FS - 1)
Single Delay (DP - 2, FS - 1)
Modulation On - Off (DP - 2, FS - 1)
Hold (DP - 2)
POWER CONSUMPTION
27 W (117V), 30 W (220V, 240V)
DIMENSIONS:
482 (W) x 47 (H) x 355 (D) mm (19 x 1 - 7 / 8 x 14 in.)
19' (EIA - 1U) rack mount
WEIGHT:
5.5kg (12 lbs.)