The Roland GT-5 features a "Manual Mode" which allows pedals 1-5 to be used as
On/Off switches for individual effects within a Patch. Each time you press
MANUAL, Manual Mode will be turned on or off. When Manual Mode is turned on,
the display indicates the effect that corresponds to each pedal. When a pedal
indicator is lit, the effect for that pedal is turned On. Use the following
procedure to change the effects assigned to the pedals in Manual Mode:
1) Press MANUAL.
2) Use PARAMETER < / > to move select a pedal number for editing.
3) Use the VALUE dial to select the effect you wish to assign to the selected
pedal.
4) Repeat steps 2 and 3 for each additional pedal.
5) Press MANUAL to exit.
On/Off switches for individual effects within a Patch. Each time you press
MANUAL, Manual Mode will be turned on or off. When Manual Mode is turned on,
the display indicates the effect that corresponds to each pedal. When a pedal
indicator is lit, the effect for that pedal is turned On. Use the following
procedure to change the effects assigned to the pedals in Manual Mode:
1) Press MANUAL.
2) Use PARAMETER < / > to move select a pedal number for editing.
3) Use the VALUE dial to select the effect you wish to assign to the selected
pedal.
4) Repeat steps 2 and 3 for each additional pedal.
5) Press MANUAL to exit.