The D-Beam is an innovative real-time feature with many routing options.
Use the following procedure to activate the D-Beam:
1) Use the VALUE dial to select a Pattern and press PLAY to begin playback.
2) Press ON in the D-Beam section so it is lit.
3) Use the D-Beam select button to select "CUT + RESO."
4) With the Pattern playing, slowly lower and raise your hand above the D-Beam
lens.
5) Hold down the D-Beam ON button and use the VALUE dial to select other
options.
6) Press STOP when you are finished.
NOTE: D-Beam settings with an "S" suffix will affect only the currently
selected Part.
D-Beam settings with an "A" suffix will affect all the Parts that are playing.
Use the following procedure to activate the D-Beam:
1) Use the VALUE dial to select a Pattern and press PLAY to begin playback.
2) Press ON in the D-Beam section so it is lit.
3) Use the D-Beam select button to select "CUT + RESO."
4) With the Pattern playing, slowly lower and raise your hand above the D-Beam
lens.
5) Hold down the D-Beam ON button and use the VALUE dial to select other
options.
6) Press STOP when you are finished.
NOTE: D-Beam settings with an "S" suffix will affect only the currently
selected Part.
D-Beam settings with an "A" suffix will affect all the Parts that are playing.