The following procedure can be used to clear the internal memory and reload the
factory settings:
(CAUTION: All USER information will be lost. Be sure to back up any information
you wish to keep.)
1. Press UTILITY so it is lit.
2. Cursor LEFT to the upper left portion of the display.
3. Rotate the VALUE dial to display "FACTORY RESET."
4. Press ENTER.
5. If "WRITE PROTECT" is displayed, use the VALUE dial to select "OFF" and
press ENTER.
6. Press ENTER to finish.
factory settings:
(CAUTION: All USER information will be lost. Be sure to back up any information
you wish to keep.)
1. Press UTILITY so it is lit.
2. Cursor LEFT to the upper left portion of the display.
3. Rotate the VALUE dial to display "FACTORY RESET."
4. Press ENTER.
5. If "WRITE PROTECT" is displayed, use the VALUE dial to select "OFF" and
press ENTER.
6. Press ENTER to finish.