Use the following procedure when you wish to make adjustments to parameters
while viewing their values in real-time:
1) Press [EFFECTS1] or [EFFECTS2] (VM-3100Pro Only).
2) Press [F1-F4 ON/OFF]. The functions appear in the display.
3) Press F3[VALUE].
4) Press the CURSOR buttons to select the effects module or parameter you wish
to adjust.
5) Press [ENTER/YES].
6) Use the UP or DOWN CURSOR to select the effect parameter that you want to
adjust.
7) Rotate the VALUE dial to adjust the effect parameter.
8) Press [LEVEL METER] to exit.
while viewing their values in real-time:
1) Press [EFFECTS1] or [EFFECTS2] (VM-3100Pro Only).
2) Press [F1-F4 ON/OFF]. The functions appear in the display.
3) Press F3[VALUE].
4) Press the CURSOR buttons to select the effects module or parameter you wish
to adjust.
5) Press [ENTER/YES].
6) Use the UP or DOWN CURSOR to select the effect parameter that you want to
adjust.
7) Rotate the VALUE dial to adjust the effect parameter.
8) Press [LEVEL METER] to exit.