When synchronizing the XP-60/80 to any other device, you will need to use MIDI Clock. ( not MTC or MMC )
Use the following procedure to set the XP-60/80 as Host.
- Press Sequencer.
- Press F1 [Setup].
- Press F6 [SEQ Sys].
- Set Sync Mode to INTERNAL.
- Set Sync Output to ON.
Use the following procedure to set the XP-60/80 as a Remote.
- Press Sequencer.
- Press F1 [Setup].
- Press F6 [SEQ Sys].
- Set Sync Mode to SLAVE.
NOTE: The XP-60/80 will only follow MIDI Clock.