The TD-7 Percussion Sound Module has 48 sequences (24 Preset, 24 User) that can be assigned to any of the pad zones or pedals. Use the following procedure to assign a Sequence to be triggered by a pad:
1) Press EDIT.
2) Cursor to PATCH. Press ENTER.
3) Cursor to TRIG. Press ENTER.
4) Cursor to the left parameter. Use the DATA DIAL to select SeqPtn # =.
5) Strike the pad zone (rim or center), or pedal.
6) Cursor right to the number. Use the DATA DIAL to select the desired sequence.
NOTE: If no sequence is desired, select "OFF."
7) Press EXIT three times to return to play mode.
1) Press EDIT.
2) Cursor to PATCH. Press ENTER.
3) Cursor to TRIG. Press ENTER.
4) Cursor to the left parameter. Use the DATA DIAL to select SeqPtn # =.
5) Strike the pad zone (rim or center), or pedal.
6) Cursor right to the number. Use the DATA DIAL to select the desired sequence.
NOTE: If no sequence is desired, select "OFF."
7) Press EXIT three times to return to play mode.