Use the following procedure to save and load data with an external device such as a librarian or sequencer:
1. Press DATA TRANSFER.
2. Use the DISPLAY buttons to select "One-way Bulk."
3. Use the LOWER or UPPER button to select "Dump" to save data through MIDI or "Load" to load data from MIDI.
4. Press LOWER.
5. Press ENTER. When the procedure is done the screen will briefly display "Complete."
1. Press DATA TRANSFER.
2. Use the DISPLAY buttons to select "One-way Bulk."
3. Use the LOWER or UPPER button to select "Dump" to save data through MIDI or "Load" to load data from MIDI.
4. Press LOWER.
5. Press ENTER. When the procedure is done the screen will briefly display "Complete."