U-20: Setting the Transmit Channel

There are two main transmit MIDI channels on the U-20:

- The Tx Channel sends out note information.
- The Tx Setup Channel sends out controller information.

Use the following procedure to select the Transmit Channel:

1. Press KEYBOARD and SOUND simultaneously.

2. Press EDIT.

3. Cursor to "KYBD," then press ENTER.

4. Cursor to "MIDI," then press ENTER.

5. Cursor to "Tx Ch" and use VALUE buttons to select the desired value.

To select the Transmit Setup Channel:

1. Press KEYBOARD and SOUND simultaneously.

2. Press EDIT.

3. Cursor to "Setup," then press ENTER.

4. Cursor to "MIDI," then press ENTER.

5. Cursor to "Tx Setup Ch" and use VALUE buttons to select the desired value.