When saving to an external SCSI drive or to a Smart Media card you are saving
all of your User Performances, Patches and Rhythm Kits as well as any samples
that have been loaded into the SIMMs memory. The single file that will be
created will be a Sound file with an .SVD extension. The process for saving
your information goes as follows:
1. Press DISK.
2. Press F2 (Save).
3. Press F1 (Drive).
4. Use the Up and Down CURSOR buttons to select the drive to save to.
5. Press F6 (OK).
6. Press F6 (Save).
7. Name the file by using the CURSOR buttons and VALUE dial.
8. Press F6 (OK).
9. Use the Up and Down CURSOR buttons to select "Wav + Parameters."
10. Press F5 (Full).
Note: Select F6 (Quick) if your are editing or adding to an existing .SVD file.
11. Press F6 (OK).
all of your User Performances, Patches and Rhythm Kits as well as any samples
that have been loaded into the SIMMs memory. The single file that will be
created will be a Sound file with an .SVD extension. The process for saving
your information goes as follows:
1. Press DISK.
2. Press F2 (Save).
3. Press F1 (Drive).
4. Use the Up and Down CURSOR buttons to select the drive to save to.
5. Press F6 (OK).
6. Press F6 (Save).
7. Name the file by using the CURSOR buttons and VALUE dial.
8. Press F6 (OK).
9. Use the Up and Down CURSOR buttons to select "Wav + Parameters."
10. Press F5 (Full).
Note: Select F6 (Quick) if your are editing or adding to an existing .SVD file.
11. Press F6 (OK).