Instruments within a selected kit can be assigned to the direct outputs. This can be very useful when multi-track recording or isolating instruments in a live sound application. Use the following procedure to assign instruments to the direct outs:
- Press [CONTROL ROOM].
- Press [F1] (MIXER).
- Press [F3] (OUTPUT).
- Strike the pad that you wish to edit.
- Use the VALUE dial to select the instrument's output designation.
(M= "Master", 1= "Direct 1", 2 = "Direct 2", 3 = "Direct 3") - Press [F2] (PAN).
- Now use the CURSOR right or left buttons, and VALUE dial to change the instrument's panning.
EXAMPLE : If a kick and snare have both been assigned to DIRECT 1 you must pan the kick opposite of the snare or both sounds will be heard out of both direct 1 LEFT and RIGHT. - Press [EXIT] when finished.