D-110: Assigning Individual Outputs for each Rhythm Instrument

First press EXIT repeatedly to exit all edit modes.

1. Press PART.

2. Press PART UP to select Part R.

3. Press EDIT.

4. Press PART UP and DOWN to select Rhythm instrument.

5. Press PARAMETER GROUP UP 3 times.

6. Press VALUE UP and DOWN to assign output.

7. Press PARAMETER GROUP DOWN 3 times.

8. Press PART UP and DOWN to select the next Rhythm instrument.

9. Repeat steps 5, 6 & 7 as needed for remaining Rhythm instruments.

10. Press EXIT.

If you want to use output 5 and 6 you will have to turn off your effects.